DJI Power 1000 V2 review: 2,600W output in a package that won’t wake the neighbors

I’ve been using portable power stations for years, and most people don’t think they need one until they actually get one. Then it quietly becomes one of those tools you end up using all the time, whether at home, on the road, at a job site, or just sitting there ready for your next power outage. The DJI Power 1000 V2 represents a significant upgrade over the original, and I spent considerable time testing it to see if it lives up to the hype.

Quick transparency: DJI sent this unit to me. They asked me to use it, share my thoughts, and make a video. That said, they have no say in the final production. Here’s what I actually found.

The specs that actually matter for drone pilots

The DJI Power 1000 V2 has a 1,024Wh battery, which is the amount of energy it can store. But capacity alone doesn’t tell the whole story. What really determines how usable a power station feels from day to day is how much power it can deliver at once.

This is one of the biggest upgrades with the V2. This unit can deliver up to 2,600 watts of continuous AC power through a pure sine wave inverter. That’s a significant jump from the original Power 1000’s 2,200W output. In practical terms, you’re not just limited to charging phones and laptops. You can run heavier loads: appliances, tools, and studio equipment without constantly worrying about tripping the inverter.

Front panel redesign makes daily use dramatically better

Another immediate improvement is the front panel layout. The original Power 1000 had only two AC outlets. Now you get four AC outlets, and that alone makes this unit feel dramatically more usable. You’re no longer juggling plugs or unplugging one device just to power another.

DJI also paid attention to spacing and orientation of the AC plugs, so larger plugs don’t block each other. It’s a small design choice, but it matters a lot in daily use.

Alongside the AC outlets, you get two USB-C ports up to 140 watts each. Then there are two USB-A ports. These 140-watt USB-C ports are a big deal. They’re powerful enough to fast charge laptops, MacBook Pros, and other high-power devices. You don’t even have to touch the AC outlets for most charging needs.

LFP battery chemistry: why the 10-year lifespan matters

The Power 1000 V2 uses LFP battery chemistry (lithium iron phosphate). This is one of the biggest reasons power stations like this one have become much more appealing over the last few years.

LFP batteries last a long time. DJI rates this battery to retain around 80% of its original capacity after roughly 4,000 charge cycles. To put that into perspective, if you charged and used this thing every single day, you’re looking at over 10 years of use before it drops to 80%.

Most people won’t come anywhere close to daily cycling. For normal use like power outages, short trips, weekend projects, and charging your gear once in a while, this is a long-term purchase. It’s not something you expect to replace in a couple of years.

DJI also put serious work into internal monitoring and safety. There are multiple temperature sensors, layered protection systems, and a robust internal design meant to keep everything running safely, even under heavy loads.

Noise testing: one of the quietest I’ve tested

If you’ve ever used a loud power station, you know how quickly that becomes a deal breaker, especially indoors. This is one of the quietest power stations in its class. Under normal loads, it’s nearly silent.

I took the Power 1000 V2 all the way down to 0%, plugged it into the wall, and let it charge between 1,400 and 1,450 watts. That’s full-speed charging. The fan barely makes a sound. It’s not the kind of sound that dominates a room or ruins your audio.

That makes a huge difference if you’re a creator charging cameras, running lights, recording audio, or working in a small studio. It also matters for van life or RVs or any setup where the power station is near where you’re sleeping. Quiet operation isn’t just a luxury anymore. It’s usability.

Ease of use: the DJI advantage

The Power 1000 V2 feels very DJI in the best way. Everything is clean, simple, and intuitive. All the ports and controls are on the front, and the screen is bright and easy to read. You can glance at it and immediately understand what’s going on.

One feature I appreciate is the physical switch for charging speed. You can toggle between faster and slower charging right on the unit. That may sound minor, but a lot of power stations hide that kind of control inside apps and menus. Here, it’s instant and obvious.

There is an app for this. It’s pretty straightforward. It lets you monitor the input and output, turn ports on and off remotely, and adjust settings like charge limits and timeouts. It’s useful without being overwhelming.

Charging speed is another strong point. From a wall outlet, this unit charges very quickly to 80% in just 37 minutes. Like most power stations, charging slows near the top of the battery, but overall recharge time is excellent. That matters because a power station is only useful if you can get it ready again quickly. Drain it, plug it in, have it back to a usable level without waiting half a day. That’s real convenience.

UPS mode: why this matters for home offices

Another feature worth mentioning is the UPS (uninterruptible power supply) functionality. You can leave the Power 1000 V2 plugged into the wall and run devices off of it. If the grid power goes down, it switches to the battery fast enough that sensitive electronics keep running.

The V2 does this in 10 milliseconds, which is twice as fast as the original Power 1000. That makes it ideal for home offices, computers, networking gear, and studio setups. It can live quietly under your desk as backup insurance.

Real-world efficiency: what I actually measured

I ran two efficiency tests from 100% down to 0% at about 195 watts output and got just over four hours for both. For a unit in this class, that’s about 80% efficiency. That’s pretty typical for this size of unit. It’s not class-leading, but it’s normal.

Like most power stations, this unit uses some power just to keep the AC output active. Under lighter loads, inverter efficiency is not class-leading. This is worth knowing if you’re planning to run low-power devices for extended periods.

The drawbacks you need to know about

While this is a strong unit overall, it’s not perfect. Let me be straight about the downsides.

DJI’s ecosystem approach: DJI relies on proprietary expansion and accessory ports. That gives you flexibility, but it also means some features that are built into other power stations require adapters here. Solar charging is the biggest example. You can do high-power solar charging with this unit, but it requires an external controller. That adds cost and complexity compared to power stations with built-in solar inputs. If your plan is heavy solar use with the simplest possible setup, think carefully before buying.

No native DC outputs: There’s no built-in 12-volt car socket or barrel connectors on the front panel. If you want to run DC appliances like certain fridges or camping gear, you’ll need an adapter. That’s not going to bother a lot of people, but it’s another example of DJI prioritizing clean design over built-in versatility.

Efficiency and idle power draw: As I mentioned, efficiency at around 195W output was about 80%, which is typical but not exceptional. The unit uses some power just keeping the AC output active.

Capacity expectations: This is a 1,024Wh unit. This is not a whole-house backup solution by itself. It’s designed for portability and essentials. Yes, you can expand it with additional batteries (up to five 2,048Wh expansion batteries for a total of 11,264Wh), which is a nice option. But out of the box, this is best viewed as a grab-and-go power station, not a multi-day whole-home system.

Who should buy the Power 1000 V2

If you’re a creator, especially someone already in the DJI ecosystem, this makes a lot of sense. It’s quiet enough to use while filming. It charges all your modern gear quickly. It’s simple to operate and built to last for many years.

If you want a light home backup, it works well for that. You can keep your refrigerator, internet, lights, and workstation running during outages. The UPS system adds another layer of utility.

If your priority is fast wall charging, quiet operation, and ease of use, this is a very strong option.

Where it’s less ideal: For people who are extremely solar-focused and want the simplest, lowest-cost solar setup without any adapters. If that’s your primary use case, you might want to look at competitors with built-in MPPT controllers.

Bottom line

The DJI Power 1000 V2 feels like it was designed for people who care about experience, not just raw specifications. It’s quiet, it’s clean, and it’s easy to live with. The long battery lifespan makes it feel like a real investment, not just a disposable gadget.

You just have to be honest with yourself about how you plan to recharge it and what you plan to power with it. If those answers align with wall charging and typical creator/home backup needs, this is an excellent choice. If you need maximum solar flexibility or native DC outputs, keep shopping.

If you have questions about the Power 1000 V2, drop them in the comments and I’ll do my best to answer each one. For those considering the larger option, check out my DJI Power 2000 review where I spent an entire day testing it in various real-world scenarios.

Thanks to DJI for sponsoring this video.